Most electrical problems start small. A light that flickers when the microwave runs, a breaker that needs resetting every few days, an outlet that stopped working in the kitchen. A lot of people reset the breaker, swap the GFCI, and move on. That works until it doesn't. When the symptom comes back, or when the fix involves opening the panel or running new wiring, that's the point where a phone call is the right next step.
We handle residential and commercial electrical work throughout Lake Stevens and the surrounding area. Call us, describe what you're seeing, and we scope the job on the phone. You get a price before anything is scheduled, and the visit starts from a clear agreement about what the work involves. We're available every day from 7:30 AM to 10:30 PM.
Pricing follows the scope, and the scope follows the fault. A tripped breaker that won't reset and a panel that needs a full replacement are different conversations, and quoting one the same way as the other doesn't serve anyone. When you call, we ask about the symptom, where it's showing up in the home, and what the wiring situation looks like as far as you can tell. That gives us enough to work with for most jobs.
A few things move a quote in one direction or another. What the fault turns out to be once we're on site matters. What has to be opened up to reach it matters. Whether the existing panel can carry a new circuit, or whether the service entrance needs upgrading alongside the panel, changes the scope. So does the condition of the wiring in an older home where the original circuits weren't designed for the loads a modern household puts on them. We explain what we find before the work goes further, so the price is agreed before anything changes.
The rate is confirmed on the call. If the job turns out to be more involved than it looked from the outside, we tell you why before we continue.
Scheduling an electrician shouldn't be complicated.
Call (425) 699-4653, describe the job, and we'll work out when to come.
We're available every day from 7:30 AM to 10:30 PM, including weekends, which matters when something goes wrong on a Saturday and waiting until Monday isn't practical.
When the problem won't keep, we treat it that way. A burning smell from an outlet, a sparking switch, a panel running hot, or a breaker that trips right after reset are all situations that call for prompt attention rather than a wait-and-see approach. Call us and we'll walk you through what to do while you wait and get the visit scheduled as quickly as the day allows.
For properties with tenants or businesses that need to stay open, we talk through access and timing on the call. If circuits need to be de-energized for part of the work, we'll tell you in advance so you can plan around it. The goal is to get the job done without the property being down longer than necessary.
Lake Stevens is a city with a mix of newer construction and homes built across several decades, and the electrical questions that come out of that mix are predictable once you've seen enough of them. Newer homes sometimes need capacity added. Older ones often need wiring that was fine for its era brought up to what current code requires. Here's what those jobs look like in practice.
Recessed lighting is one of the more common upgrade requests in residential properties. The job involves cutting new can locations, running wire back to a switch, and tying into the existing circuit where capacity allows. LED retrofits are simpler, but older fixtures on circuits without arc-fault protection may need that addressed at the same time. We scope what the existing wiring supports before quoting, so the lighting work and any related circuit work are priced together.
A portable or standby generator is only as useful as the transfer switch that connects it to the home safely. Without a proper transfer switch, a generator tied directly to the home's wiring creates a hazard for anyone working on the utility line during an outage. The electrical work here covers the transfer switch installation, the dedicated circuit feeding it, and the tie-in at the panel. In the Pacific Northwest, where wildfire-season power disruptions have become a real planning concern, generator backup is a practical question for a lot of households rather than a luxury.
Homes built during certain construction eras used aluminum for branch-circuit wiring rather than copper. The material itself isn't the problem. The problem is how aluminum behaves at connection points over time. It expands and contracts differently than copper, which loosens connections at outlets and fixtures and creates heat at those points. Remediation involves addressing those connection points with the correct materials and methods rather than replacing all the wiring in the home. We assess what's there and explain the options before quoting.
Low-voltage work covers the wiring side of doorbells, video doorbell installations, data runs for home offices, and structured wiring for media or network setups. Adding a circuit for a home office data connection is often simpler than people expect, particularly in newer construction where the walls are more accessible. We handle the rough-in and the connection point. The devices and network equipment are outside our scope, but the wiring that feeds them is exactly what we do.
Electrical work in a condo or apartment in Lake Stevens runs into a layer of complexity that single-family homes don't have. The panel serving your unit is often in a shared corridor, a utility room, or a location that requires building management access. That changes how the visit is scheduled and who needs to be notified before the work starts.
The circuits inside the unit are generally the owner's responsibility. The service entrance, the meter base, and any shared distribution equipment belong to the building. When a fault is upstream of your unit's panel, the repair path goes through building management rather than through us alone. We'll tell you on the call where the fault appears to be and who needs to be involved.
For tenants, the same principle applies. Describe the problem, and we'll help you work out whether it's something the landlord needs to authorize before we schedule.
Older homes and even some newer ones run into a straightforward problem: the electrical supply wasn't designed for what the property is being asked to run now. A panel sized for a smaller load, circuits shared between appliances that each need their own, or a service entrance that can't carry an EV charger and the rest of the home at the same time are all versions of the same situation.
We work out whether the supply can take the added load before quoting the work. That starts with a load calculation. If the panel has capacity, we run the circuit. If it doesn't, we explain what an upgrade involves and price the panel work alongside the circuit so both are handled at once. Grounding and bonding are checked as part of any panel or service work, because those are the parts that protect the whole system when something goes wrong upstream.
The Pacific Northwest's rapid growth in EV adoption and rooftop solar has pushed this conversation into a lot of homes that weren't thinking about it five years ago. A dedicated 240-volt circuit for a Level 2 charger, or the interconnect capacity for a battery storage system, both require the panel to have room. We scope that on the call and confirm before anything is scheduled. For what the job actually entails, the services page lays it out.
We cover Lake Stevens and the surrounding parts of Snohomish County. That includes the communities nearby: Cavalero, Machias, Bunk Foss, Lake Cassidy, and Lochsloy. If you're in the area and want to confirm we cover your address, call and ask. We'll tell you straight.
Work is scoped and scheduled the same way regardless of which community you're calling from. The process doesn't change based on where you are in the county.
Older homes in the area frequently show up with undersized panels, circuits shared between appliances that each need their own, and outlets or switches that lack the arc-fault or ground-fault protection current code requires. Aluminum branch-circuit wiring from certain construction eras is also a common finding. We assess what's there on the visit, explain what it means, and scope any corrections before the work starts.
Yes. A pre-purchase electrical inspection covers the panel, the visible wiring, the grounding and bonding, and the protective devices throughout the home. We give you a clear picture of what's there and what, if anything, needs attention.
Call (425) 699-4653 to describe the property and get the inspection scheduled before your closing date.
Panels located outside, in a detached structure, or in a common area are handled the same way as any other panel job. We confirm the location on the call so we know what access is needed before arriving.
If a commercial job has to pause, we make sure nothing is left in an unsafe condition before we stop. We document where the work stands and schedule the continuation before leaving the site.
Some older panel brands use breaker types that are no longer in production, which can make replacement more involved. We assess what is in the panel before quoting a replacement and let you know if sourcing is a factor.
Moisture intrusion into a junction box, conduit, or outdoor outlet can cause a fault that clears once things dry out. We look for points where water can enter the wiring system, including compromised weatherproofing and cracked conduit, to find the source.
Every home's wiring tells a different story, and a small fault is worth a phone call the same way a panel replacement is. A single dead outlet, a switch that buzzes when it's on, a ceiling fan that needs wiring where none exists, a circuit that trips under a load it should handle easily. None of those are too small to scope on the call and get scheduled.
Call (425) 699-4653.
We're available every day from 7:30 AM to 10:30 PM. Describe what you're seeing, get a price, and get it on the calendar. That's what Everett Electrical Company is here for.
Close by, we also take electrical work in: Bunk Foss, Fobes Hill, Snohomish, Marysville, Three Lakes. There is more on our complete list of towns.
We handle the full range of residential and commercial electrical work in Lake Stevens and across Snohomish County. Every job starts the same way: you call, describe what you are seeing, and we scope the work and give you a price before anything is scheduled. The table below lays out what each service covers, who it fits best, and a practical note to help you decide where to start.
| Service | What's Included | Ideal For | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp service upgrade, Fuse box to breaker panel replacement, Subpanel installation, Load calculation and service-entrance work | Homes adding an EV charger, major appliance, or battery system that the existing panel cannot support | Panel upgrades typically require a permit and utility coordination. We handle that side of the process so the work is inspected and the utility reconnect goes smoothly. |
| Electrical Repairs & Troubleshooting | Dead outlets traced to source, Flickering light diagnosis, Burning smell and arcing faults, GFCI and AFCI failures | Homeowners and landlords dealing with an active electrical symptom | A burning smell, sparking outlet, or breaker that trips immediately after reset are urgent faults. Call right away rather than putting it off. |
| Solar & Battery Backup | Battery storage interconnect wiring, Transfer equipment installation, Panel capacity for added load, Grid-tied and backup circuit work | Western Washington homeowners adding battery storage for grid resilience or outage coverage | Wildfire-season power shutoffs have made backup power a practical consideration in this region. The transfer equipment has to be wired correctly so the system operates safely when grid power is interrupted. |
Call (425) 699-4653 and we will scope the job on the phone, give you a straight answer about your panel and wiring, and confirm the price before anything is scheduled.
(425) 699-4653