Some electrical calls are planned weeks out. A homeowner wants new circuits in the garage, a landlord needs a panel replaced before a tenant moves in, or a rental property needs a wiring inspection before it goes back on the market. Those jobs get scoped on the phone, priced before anything is scheduled, and booked at a time that works. Planned electrical work like that is a regular part of what we do across Larch Way and the surrounding area.
The other kind of call comes in the same morning something stops working. A breaker that will not reset, an outlet that went dead overnight, a burning smell near the panel. We take those calls too, every day from 7:30 AM to 10:30 PM. Whether the job is planned or urgent, the process is the same: call, describe what you are seeing, and we scope it on the phone before anything is scheduled. That is how we approach every job, regardless of the size.
A finished electrical job is a tested one. Before we close up, every circuit, outlet, and protective device involved in the work gets verified under real conditions. A breaker that seats correctly and reads right on a meter is not the same as one that holds under the load it is meant to carry. We check both. GFCI and AFCI devices are tested for proper trip response, not just continuity. If something does not perform the way it should, we find out before we leave, not after.
Panel labeling matters more than most homeowners realize until the property changes hands. A panel where every breaker is correctly identified and matched to the circuit it controls makes future troubleshooting straightforward. It also matters when a home inspector walks through during a sale, or when a new tenant calls about which breaker controls which room. When we complete panel work or add circuits, we update the labeling to reflect what is actually there.
For rental properties and homes that may be sold, a clear record of what was done, what was corrected, and what code standard the work meets is worth keeping. We write it down. That documentation does not expire, and it follows the property through every future transaction.
Clear pricing starts with a clear scope. The three things that move a quote are the fault itself, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being asked of it. A simple outlet replacement at an accessible location is a different job from tracing a fault through a finished wall to a junction that was never labeled. A new circuit for a workshop tool is a different conversation if the panel has capacity to spare versus one that is already running close to its limit.
None of that is a reason to avoid calling. It is a reason to describe the situation as clearly as you can when you do. The more we understand on the phone, the more accurate the price we give you before the visit.
Call (425) 699-4653 and describe what you need.
We scope the job on the call and give you a price before anything is scheduled. That price covers what we agreed the job involves. If something changes once we are on site, we explain why before the work goes further. The price is agreed before we start, and that does not change once we are through the door.
Larch Way's housing stock includes homes built across several different eras, and the wiring in those homes reflects the standards of the time they were built. Some of it is fine. Some of it needs attention.
Knob-and-tube wiring, where it still exists, is the one that raises the most questions. It was installed without a ground conductor, which means it cannot support the three-prong outlets and grounded circuits that modern appliances and electronics require. It also was not designed for the electrical loads a household runs today. Whether it needs to be replaced entirely or partially depends on the condition of the wiring, what it is feeding, and what the homeowner needs from it. We assess what is there and explain the options before quoting any work.
Aluminum branch-circuit wiring from a later period carries a different set of concerns, centered on the connection points at outlets and fixtures rather than the wire itself. Remediation is possible without a full rewire in many cases. We check the connections, identify where the risk is concentrated, and scope the correction from there.
Code-compliant wiring is the standard the work is held to on every job, whether it is a single outlet replacement or a full rewire of an older home.
Not every electrical job happens in an empty house. Tenants have schedules. Businesses cannot shut down a room or a floor without planning for it. We work around those constraints when we book the visit.
When you call, tell us what the situation is. If a rental unit is occupied and the tenant needs advance notice, we account for that in the scheduling. If a commercial property needs the work done outside business hours, we talk through what the schedule allows. When you call, a real person answers, and that conversation happens on the first call, not after a form gets processed somewhere.
For urgent faults, the same flexibility applies. A problem that cannot wait does not get put in a queue. We confirm what is available and get the visit on the calendar.
A full rewire replaces the branch-circuit wiring throughout the home, updates the panel to match, and brings the circuits up to current code. A partial rewire targets the areas where the existing wiring cannot safely support what is being asked of it. Knob-and-tube replacement is the most common reason for a partial rewire in older homes. We assess which approach fits the property and scope it clearly before any work is quoted.
Running power to a detached garage, a shed, or an electric gate is a dedicated circuit job that starts at the main panel and ends at the outbuilding. The wiring method depends on the distance, the load the building needs to carry, and whether the run goes overhead or underground. Electric gates need a circuit sized for the operator and any additional loads on the same feed. We scope all of that on the call before the visit.
High-draw equipment needs its own circuit. A hot tub, a table saw, a welder, or a large compressor pulling current from a shared circuit causes nuisance trips and, in some cases, wiring that runs hotter than it should. Dedicated circuits are sized for the load, the panel is checked for capacity before anything is added, and the correct outlet or connection point is installed at the load end.
When a detached garage or workshop needs more than one or two circuits, a subpanel is the cleaner answer. It gives the outbuilding its own distribution point, keeps the wiring organized, and avoids running multiple individual circuits back to the main panel. We size the subpanel feed based on the total load the building needs to carry.
Three-way switching lets you control a light from two locations, a stairway with a switch at the top and bottom being the most common example. Multi-location switching extends that to three or more points. The wiring is more involved than a standard single-pole switch, and getting it wrong produces switches that work sometimes and not others. We wire it correctly the first time and test every switching position before the visit is done. If you would rather read than call, the list of electrical services we handle has the detail.
We serve Larch Way and the surrounding communities throughout Snohomish County. That includes Martha Lake, North Lynnwood, Alderwood Manor, Lake Stickney, and Lynnwood. If your address is in the area and you are not sure whether we cover it, call and we will confirm.
The same process applies regardless of which town you are calling from. You describe the job, we scope it on the phone, and you get a price before anything is scheduled.
Two Level 2 chargers require two dedicated 240-volt circuits and double the panel capacity compared to a single installation. We run a load calculation to confirm the panel can support both before quoting the work, and if an upgrade is needed, we scope that as part of the same job.
If a neighbor loses power simultaneously, it suggests the fault is at the utility level rather than inside your property. We still assess the service entrance and panel to confirm nothing on your side is involved, and we let you know if the utility is the right contact.
We discuss scheduling options on the call and work out a visit time that fits the tenant's availability. If a specific window is needed, mention it when booking and we will confirm whether it is available.
Not always. Whether a panel can support a Level 2 charger depends on what it is already feeding and how much capacity is left. We run a load calculation before quoting the charger installation, so you know going in whether the panel handles it as-is or whether an upgrade needs to be part of the job. Either way, the scope and the price are confirmed on the call before anything is scheduled.
Yes. We can provide documentation of the work completed, which is useful for property records and for demonstrating that a fault was addressed. Ask about this on the call and we will confirm what is included.
Homes of a certain age in this area tend to have wiring that was installed to a different standard than what current code requires. Knob-and-tube wiring without a ground conductor, aluminum branch-circuit connections that have loosened over time, and panels that were never upgraded to handle today's electrical loads are the most common findings. None of those are emergencies on their own, but all of them are worth understanding before they become one. Call and describe what you have, and we will tell you what the assessment involves.
Call (425) 699-4653 for a quote.
Describe what you are seeing, and we will scope it on the phone. The price is confirmed before we book the visit, and it covers what we agreed the job involves. We are available every day from 7:30 AM to 10:30 PM.
Just as close, we take electrical work in: Picnic Point, Eastmont, Mukilteo. Check our complete list of towns.
We handle the full range of residential and commercial electrical work in Larch Way and across Snohomish County. Every job starts the same way: you call, describe what you are seeing, and we scope the work and give you a price before anything is scheduled. The table below lays out what each service covers, who it fits best, and a practical note to help you decide where to start.
| Service | What's Included | Ideal For | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp service upgrade, Fuse box to breaker panel replacement, Subpanel installation, Load calculation and service-entrance work | Homes adding an EV charger, major appliance, or battery system that the existing panel cannot support | Panel upgrades typically require a permit and utility coordination. We handle that side of the process so the work is inspected and the utility reconnect goes smoothly. |
| Solar & Battery Backup | Battery storage interconnect wiring, Transfer equipment installation, Panel capacity for added load, Grid-tied and backup circuit work | Western Washington homeowners adding battery storage for grid resilience or outage coverage | Wildfire-season power shutoffs have made backup power a practical consideration in this region. The transfer equipment has to be wired correctly so the system operates safely when grid power is interrupted. |
| Older-Home Rewiring | Aluminum wiring remediation, Knob-and-tube wiring assessment and replacement, Partial rewires targeting problem areas, Pre-purchase electrical inspections | Buyers, owners, and property managers with homes built before modern wiring standards | Aluminum wiring from certain construction eras requires specific remediation at every connection point, not just a visual check. We identify what is there and explain what the correction involves before quoting. |
Call (425) 699-4653 and we will scope the job on the phone, give you a straight answer about your panel and wiring, and confirm the price before anything is scheduled.
(425) 699-4653