A written record of the electrical work done on a property is worth more than most homeowners realize until the moment they need it. When a Mukilteo home goes to market, when a landlord turns over a rental, or when an insurer asks what was done to bring an older panel up to code, that documentation is the difference between a smooth process and a drawn-out one. We scope every job on the phone, confirm a price before the visit, and the work is done to current code so it holds up under any review that follows.
Mukilteo is a town where the housing stock spans a wide range of ages, and the electrical systems inside those homes span the same range. Some are recent builds with modern panels and plenty of capacity. Others are older homes that have been added to over the years, with wiring that reflects every era of construction. Whatever the property, we handle the job from first call through finished work.
Reach us through Everett Electrical Company at (425) 699-4653, available every day from 7:30 AM to 10:30 PM.
Most electrical work does not require a full shutdown of the property. A single circuit can be isolated at the breaker while everything else in the house stays live. Outlet replacements, fixture work, ceiling fan installation, and adding a circuit to a room all fall into that category. The affected area loses power for the duration of the work, and the rest of the property carries on normally.
Panel work is different. Replacing a breaker panel, upgrading from a 100-amp to a 200-amp service, or installing a service-entrance upgrade requires shutting down the main breaker for part of the job. That window is planned before the visit so you know what to expect. If you work from home or run a business out of the property, we talk through the schedule on the call so the shutdown lands at a time that causes the least disruption.
If the property cannot go fully dark, we scope the job in stages where the work allows it. Some panel work can be structured so the critical circuits, the ones feeding a home office or a refrigerator, are the last to go down and the first to come back. That is a conversation worth having before the visit is booked, not after the electrician arrives.
The same applies to a tenant-occupied property or a small business that has to stay open during the work. We confirm what the job requires, what can be sequenced, and what the customer needs to arrange on their end, all before anything is scheduled.
Scheduling a visit is straightforward.
Call (425) 699-4653, describe what you are seeing or what you need done, and we scope the job on the phone.
The price is confirmed before anything is booked. There is no ambiguity about what the work covers or what it costs before we show up.
When you call, a real person answers. That person knows the trade and can scope the job on the call, so you are not leaving a message and waiting to find out whether the problem is urgent or whether it can wait a few days.
For problems that will not keep, we take those calls every day within our hours. A burning smell from an outlet, a sparking receptacle, a breaker that trips immediately on reset, or a panel that is running warm are all situations that call for electrical work without delay. Describe what you are seeing and we will tell you what the visit needs to cover.
The price is confirmed when the job is scoped, not before. That is the honest answer, and it is the only one worth giving. A ceiling fan installation and a full panel replacement are different conversations, and the rate reflects what the work actually involves.
Three things move a quote. The first is what the fault turns out to be once we can see it. A tripped breaker might be a worn breaker or it might point to a wiring fault behind the wall. The second is what has to be opened up to reach the problem. Accessible wiring and wiring buried in a finished ceiling are different amounts of work. The third is whether the existing panel can carry the change. Adding a 240-volt circuit for a dryer or an EV charger requires available capacity in the panel. If the panel needs an upgrade to support the new load, that becomes part of the scope.
When you call, the scope and the price are settled on the call before anything is scheduled. If the job changes once we are on site, we explain why before the work goes further.
Dependable service. A price agreed before we start. Local know-how.
Homes of a certain age were wired with materials and methods that made sense at the time and create real concerns now. In the Pacific Northwest, that means knob-and-tube wiring in the oldest properties, aluminum branch-circuit wiring in homes from a later era, and panels that were sized for households that ran far fewer circuits than a modern home requires.
Knob-and-tube wiring lacks the grounding conductor that current code requires. It can also be compromised by insulation that was added around it over the years, which changes how the conductors dissipate heat. Where it exists, the question is whether it needs to be replaced in full, replaced in part, or whether the priority is adding grounding and protective devices to the circuits it feeds.
Aluminum branch-circuit wiring creates connection problems at outlets and fixtures that copper wiring does not. The metal expands and contracts differently, and connections that were tight when they were made can loosen over time. The remediation involves specific connectors and anti-oxidant treatment at every connection point, not just replacing the wire itself.
If you are buying an older property in the area and want an electrical assessment before closing, we handle those calls. If you manage a rental and need a clear picture of the wiring condition, the process is the same.
Apartment and condo electrical work comes with a layer of complexity that a single-family home does not have. The panel serving your unit may be inside the unit, in a hallway cabinet, or in a common electrical room shared with other tenants. Knowing where it is and what it controls matters before any work starts.
Some of what feeds your unit is shared. The service entrance, the meter bank, and the wiring between the main panel and your unit's subpanel are typically the building's responsibility, not the individual unit's. What is inside your unit, from the subpanel to every outlet and fixture, is yours to maintain.
If you are a tenant and something inside the unit has stopped working, call us and we will scope what is accessible and what is not. If you are a property manager or building owner, we handle multi-unit calls the same way we handle any other job: scope on the phone, price confirmed before the visit, work done to code.
Every home and outbuilding has its own set of electrical questions. These are the specific situations that come up regularly on properties in this area.
Older homes that still have knob-and-tube wiring need it assessed before any other electrical work is added to those circuits. The replacement involves pulling new copper conductors, updating the panel connections, and confirming that grounding is in place throughout. We scope the extent of the existing wiring first so the replacement covers what it needs to and nothing more.
Low-voltage work covers doorbell wiring, network cabling, and the rough-in for data and communication systems. These circuits run at lower voltages but still need to be planned around the home's existing wiring to avoid interference and to meet current standards. If a doorbell transformer is failing or a data outlet needs to be added to a room, that is a straightforward call.
A detached garage or a workshop that needs more than one or two circuits benefits from its own subpanel rather than running individual circuits all the way back to the main panel. The subpanel is fed from the main, sized for the load the outbuilding needs, and gives you room to add circuits later without another run back to the house. We size the feed and the subpanel together so the capacity is there from the start.
A welder, an air compressor, or a heavy shop tool draws enough current that it needs a dedicated circuit sized for its specific load. Running a 240-volt circuit for workshop equipment involves the right wire gauge, the correct breaker, and an outlet rated for the amperage the tool requires. We confirm what the equipment needs before we run the circuit.
Outdoor lighting serves a real purpose on a property, particularly through the darker months of a Pacific Northwest winter. Security lights, motion-sensor fixtures, and landscape lighting all require weatherproof wiring and the correct outdoor-rated boxes and fixtures. We run the circuits from inside, confirm the GFCI protection is in place at outdoor locations, and test every fixture before the job is done.
A staircase, a long hallway, or a room with two entries often needs a switch at each end controlling the same fixture. Three-way switching involves specific wiring between the switches, and getting it wrong means a switch that works in one position but not the other. If an existing three-way setup has stopped working correctly, the fault is usually a failed switch or a connection that has loosened at the traveler terminals. We trace it and fix it rather than replacing everything.
Call now. Get it scoped. Get it wired to code. Most of the practical detail sits on our services page.
We cover Mukilteo and the surrounding area, including Picnic Point, Lake Stickney, Meadowdale, Clinton, and North Lynnwood. Properties throughout Snohomish County are in our service area, and the same process applies regardless of which town the property sits in.
Call (425) 699-4653 and confirm your address on the call.
It depends on whether the existing panel has open slots and enough available capacity to carry the additional load. We check both before quoting a new circuit, and if the panel cannot support it safely, we explain what an upgrade would involve.
Homes built before modern wiring standards were adopted often have panels that were never sized for today's electrical loads, outlets that lack ground-fault protection in kitchens and bathrooms, and in some cases wiring that predates current code requirements. The most common calls involve tripped breakers that point to overloaded circuits, outlets that have stopped working, and panels that need to be assessed before a new circuit or appliance is added. We scope all of those on the phone before the visit is booked.
We discuss the kitchen's operating schedule on the call and plan the electrical work around the windows when the space is not in service. Shutdowns are coordinated in advance so the kitchen can plan around them.
If the work takes longer than the planned window, we let you know before the window closes and discuss the options. We do not leave the work in an unsafe state, and we confirm the next step before we leave the site.
We can review what another quote describes and explain what the work involves based on what you tell us. We cannot verify the accuracy of another contractor's assessment without seeing the property ourselves, but we can help you understand what the scope should cover.
It depends on how many circuits the outbuilding needs and how far it sits from the main panel. A garage with one or two circuits can often be fed directly from the main panel. A workshop running heavy equipment, multiple outlets, and lighting is a better candidate for a subpanel, which gives the outbuilding its own distribution point and room to add circuits later. We assess what makes sense for the specific property on the call.
Describe the problem, get a price, and get it scheduled. That is the whole process. There are no forms to fill out and no waiting for a callback that may or may not come.
Call (425) 699-4653 every day from 7:30 AM to 10:30 PM.
Reach us by email at [email protected]. We handle repairs, panel upgrades, rewiring, outlets, lighting, EV charger circuits, surge protection, and everything in between.
We also take electrical work in: Picnic Point, Larch Way, Eastmont. The rest are on our complete list of towns.
We handle the full range of residential and commercial electrical work in Mukilteo and across Snohomish County. Every job starts the same way: you call, describe what you are seeing, and we scope the work and give you a price before anything is scheduled. The table below lays out what each service covers, who it fits best, and a practical note to help you decide where to start.
| Service | What's Included | Ideal For | Worth Knowing |
|---|---|---|---|
| Wiring & Circuit Installation | New circuit runs from the panel, Partial rewires for specific areas, Garage and workshop wiring, Circuit additions for added load | Any property adding a room, finishing a basement, or expanding electrical capacity in a workspace | Hire local and the wiring is done by someone who knows the area. We confirm panel capacity before running new circuits so the added load is accounted for from the start. |
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp service upgrade, Fuse box to breaker panel replacement, Subpanel installation, Load calculation and service-entrance work | Homes adding an EV charger, major appliance, or battery system that the existing panel cannot support | Panel upgrades typically require a permit and utility coordination. We handle that side of the process so the work is inspected and the utility reconnect goes smoothly. |
| Older-Home Rewiring | Aluminum wiring remediation, Knob-and-tube wiring assessment and replacement, Partial rewires targeting problem areas, Pre-purchase electrical inspections | Buyers, owners, and property managers with homes built before modern wiring standards | Aluminum wiring from certain construction eras requires specific remediation at every connection point, not just a visual check. We identify what is there and explain what the correction involves before quoting. |
Call (425) 699-4653 and we will scope the job on the phone, give you a straight answer about your panel and wiring, and confirm the price before anything is scheduled.
(425) 699-4653