When a property manager calls about a dead circuit in a rental, or a builder needs a circuit run before the drywall goes up, the call lands the same way: describe the problem, get a price, and schedule the visit. We handle that process from the first call. Whether the work is a straightforward outlet replacement or a panel upgrade to support a new appliance load, we scope it on the phone and confirm the price before anything is booked. We're available every day from 7:30 AM to 10:30 PM, so a problem that shows up on a Saturday doesn't have to wait.
Three Lakes is a town where the housing stock tells you a lot about what the electrical work involves. Older homes on original wiring, detached garages with circuits that were added informally, outbuildings that need a proper supply, and the occasional undocumented panel modification are the kinds of situations we work through regularly. We take those calls and handle the full scope, from a single outlet to a whole-home rewire.
Some electrical problems announce themselves clearly. Others don't. A breaker that trips when the washing machine runs at the same time as the microwave is a load problem. A breaker that trips once, resets, and then holds for two weeks before tripping again is harder to read. Intermittent faults are their own category of work.
The same applies to a circuit that fails only in wet weather, or a light that flickers under a specific load combination and behaves normally the rest of the time. These aren't problems that respond to a swap-and-see approach. They need proper diagnostics: tracing the circuit, checking connections under the conditions that reproduce the fault, and identifying whether the issue is at the breaker, at a junction, or in the wiring itself.
We start with the diagnosis. That means understanding what the fault is actually doing before quoting any work. Right diagnosis. Right wiring. Clear explanation.
EV adoption across the Pacific Northwest runs well ahead of the national average, and a Level 2 home charger needs a dedicated 240-volt circuit to work properly. We assess the panel first. If capacity is there, we run the circuit to the charging location and install the correct connection point. If the panel needs an upgrade to carry the added load, we scope that alongside the charger circuit so everything is sized correctly from the start.
Electric ranges, wall ovens, and dryers each require a dedicated circuit sized for the appliance. Sharing a circuit with other loads causes nuisance trips and can mean the equipment runs below its rated performance. Older homes in this area sometimes have appliances wired in ways that made sense at the time but don't match current requirements for that equipment type. We assess what is there, run the correct circuit, and install the right outlet for the load.
A detached garage or outbuilding that needs reliable power requires a properly run supply from the main panel, not an extension cord through a window. That typically means a subpanel in the outbuilding fed by a dedicated circuit from the house. Adding a circuit is often simpler than people expect, and getting it done properly means the outbuilding's wiring is documented, grounded correctly, and ready to carry whatever load the space needs.
Recessed lighting, new fixture wiring, and ceiling fan installation are common requests, particularly in older homes where the existing lighting layout doesn't match how the space is actually used. Ceiling fans added to rooms without existing wiring require a new circuit or a circuit extension. We handle the wiring side, confirm the box and circuit are rated for the fan's weight and load, and finish the installation.
An outdoor outlet that isn't properly rated for exterior use is a fault waiting to happen. Weatherproof outlets and enclosures are required wherever a receptacle is exposed to the elements, and the circuit feeding them needs GFCI protection. We install new outdoor outlets where none exist, replace non-weatherproof receptacles, and run the circuit from the panel when there's nothing nearby to extend from.
A hot tub, a large workshop tool, or a new appliance with a significant draw all need a dedicated circuit sized for the load. The panel has to have the capacity to support it, and the circuit has to be run in the correct wire gauge for the distance and the amperage. We scope the panel capacity, run the circuit, and install the correct outlet or connection point for the equipment.
Vacant properties are the easiest time to do electrical work that would otherwise require coordinating around a household's schedule. No occupied rooms to work around, no need to shut off circuits while someone is home, and no disruption to a tenant's daily routine. A rental that's between occupancies is a practical window for outlet upgrades, lighting changes, panel work, or a full inspection before the next lease starts.
Access when the property is vacant is straightforward to arrange. Property managers typically have a key and can confirm the visit window directly. We confirm what the job involves on the call, agree a time, and handle the work with the property empty. If anything comes up during the visit that changes the scope, we call before going further.
The same logic applies to a property being prepared for sale. An electrical inspection before listing gives the seller a clear picture of what the wiring involves, and any corrections can be handled while the property is accessible and unoccupied.
Most electrical work beyond a simple device replacement requires a permit. That covers new circuits, panel upgrades, service changes, subpanel installations, and wiring added to an outbuilding. The permit process means the work gets inspected by the authority having jurisdiction, which confirms it was done to code.
We handle the permit filing as part of the job. The timing matters: permits are filed before the work starts, and the inspection happens after the work is roughed in but before anything is closed up behind walls. That sequence affects how the job is scheduled, and we account for it when we confirm the visit.
Rules vary between jurisdictions, and what applies in one part of Snohomish County may differ from what applies in another. We confirm what's required for your specific address on the call, so there are no gaps in the process after the work is done.
Appointments are arranged on the phone. You describe the problem or the work you need, we scope it and confirm the price, and then we find a time that works. We're available every day from 7:30 AM to 10:30 PM, which covers most scheduling situations without requiring you to take a weekday off.
Some electrical faults cannot wait for a scheduled appointment. A burning smell near an outlet or panel, a sparking switch, a breaker that won't hold after reset, or a hot outlet cover are all conditions that shouldn't sit until a convenient appointment opens up. We take those calls within our daily hours and handle them accordingly.
A business that needs to stay open during electrical work, or a tenant who can't have the power off for an extended period, requires a different approach to scheduling than an empty property. We talk through what the job involves and what it requires in terms of access and circuit shutdowns before the visit is confirmed.
Call us and we'll walk you through the fix. Take a look at the page listing our electrical services to see what else is covered.
The price for any electrical job follows the scope. What the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change are the things that move a quote in one direction or another. A single outlet replacement and a full panel upgrade are different conversations, and the price reflects what the work actually involves.
When you call, describe what you're seeing or what you need done. We scope it on the phone and give you a price before anything is scheduled. If the job changes once we're on site, we explain why before the work goes further. You know what the work covers and what it costs before we start.
Dependable service. A price agreed before we start. Local know-how.
We cover Three Lakes and the surrounding communities in Snohomish County. That includes Lake Roesiger, Chain Lake, Machias, Cavalero, and Monroe North. If you're in the area and want to confirm we cover your address, call and we'll let you know.
The work is the same regardless of which part of the county the property sits in. Older homes with original wiring, outbuildings that need a proper supply, and panels that haven't been touched in decades are common across this whole area. We handle all of it.
If access cannot be arranged with the tenant, the visit cannot proceed. We let the property manager or owner know as soon as the situation is clear so they can resolve the access question and reschedule.
An outdoor outlet needs a weatherproof cover rated for wet locations, a GFCI device on that circuit, and proper sealing where the box meets the exterior surface. We confirm all three are in place when installing or replacing an outdoor outlet.
Yes. If life-sustaining or sensitive medical equipment is in use at the property, we need to know before the visit so we can plan shutdowns carefully and minimize the time any affected circuit is off. Mention it on the call when scheduling.
Yes. High-draw tools like welders and large compressors pull enough current that a shared circuit will trip under load and may cause wiring to overheat over time. We size a dedicated circuit to the equipment's actual draw and install the correct outlet type for it.
Yes. A pre-sale or pre-renovation electrical inspection covers the panel, the wiring condition, grounding and bonding, and any code corrections the property needs. We scope the inspection on the call and confirm what it covers before the visit is scheduled. If corrections are needed, we can quote that work at the same time.
Yes. A detached structure that needs reliable power typically requires a dedicated circuit from the main panel, and often a subpanel in the outbuilding itself. We assess the main panel's capacity, confirm what the outbuilding's load requires, and run the supply correctly so the wiring is grounded, documented, and ready for whatever the space needs.
Describe the problem or the work you need done. We scope it on the call, give you a price, and confirm the visit. No forms to fill out, no waiting for a callback.
Call (425) 699-4653 to reach Everett Electrical Company and get the job on the schedule.
Also serving: Chain Lake, Bunk Foss, Snohomish, Lake Stevens, Woods Creek. For every town we reach, see our complete list of towns.
We handle the full range of residential and commercial electrical work in Three Lakes and across Snohomish County. Every job starts the same way: you call, describe what you are seeing, and we scope the work and give you a price before anything is scheduled. The table below lays out what each service covers, who it fits best, and a practical note to help you decide where to start.
| Service | What's Included | Ideal For | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp service upgrade, Fuse box to breaker panel replacement, Subpanel installation, Load calculation and service-entrance work | Homes adding an EV charger, major appliance, or battery system that the existing panel cannot support | Panel upgrades typically require a permit and utility coordination. We handle that side of the process so the work is inspected and the utility reconnect goes smoothly. |
| Electrical Repairs & Troubleshooting | Dead outlets traced to source, Flickering light diagnosis, Burning smell and arcing faults, GFCI and AFCI failures | Homeowners and landlords dealing with an active electrical symptom | A burning smell, sparking outlet, or breaker that trips immediately after reset are urgent faults. Call right away rather than putting it off. |
| Standby Battery for Outages | Battery backup system wiring, Transfer switch installation, Critical circuit selection and wiring, Panel integration for backup load | Households that need power for medical equipment, refrigeration, or essential systems during an outage | The transfer switch is what keeps the battery system from feeding power back into the grid during an outage. Getting that wiring right is the part that matters most for safe operation. |
Call (425) 699-4653 and we will scope the job on the phone, give you a straight answer about your panel and wiring, and confirm the price before anything is scheduled.
(425) 699-4653